Something interesting for HTPC enthusiasts that we missed out. Galaxy has a special 9600GT Low Profile Low Power 9600GT card that consumes less than 60W and doesn't requires external 6-pin power connector. It is based on the 9600 GT Green Edition GPU where we have been talking about lately. This card has 8-layer PCB which is 203.2mm in length and 69.5mm in height, singleslot custom copper cooling so it can be fitted into a mini HTPC case. the card is clocked at 600MHz core with 512 MB of GDDR3 memory clocked at 900 (1800) MHz on a 256-bit wide memory bus. Outputs include DVI, HDMI.
According to Galaxy internal testing, the GPU core TDP is reduced significantly by just a reduction of 0.1V VGPU. As such, the core temp can be lowered by nearly 10 degrees using the same type of cooling.

Targeted at HTPC users, the AXP-140 stands at just 7cm tall. In fact, you could stuff a system with this cooler mounted into any HTPC case that has just 11cm of height clearance. Although the primary consumer would be HTPC users, enthusiasts running high-end rigs can also use this heatsink for their systems if they prefer down-draft airflow construction.
Unlike tower-styled heatsinks, down-draft airflow helps to cool motherboard components such as the neighbouring northbridge and more importantly, the MOSFETs.You could install either a 120mm fan, or a 140mm fan on it. Running a bigger fan at lower speed produces the same airflow as a smaller fan at a comparatively slightly higher speed, but doing the former cuts down on noise output.There are six nickel-plated heatpipes that are soldered to a nickel-plated full copper base for high efficiency heat transfer.

So far, this AXP-140 is only known to support the LGA 775 platform.

Let's take a look at some heatsink data:

Dimensions - 145 x 147 x 70.2 mm (L x W x H)
Weight - 900g
Heatpipes - 6 nickel-plated
Base - Copper (but nickel-plated)
Fans - 120mm or 140mm

Retail price is estimated to be about US$59.